 |
| Industrial Inspection Microscope – Metallurgical
(M-400 ) |
| Features |
| |
1. Big Stage with Extra Large Moving Range 250×250mm.
2.Well designed structure, easy to operate.It is specially used in IT Industry for Large Area Integrate Circuit, Wafer Observation and Inspection.
3. Excellent Optical Quality with Infinite Optical System and LWD High Magnification Objective(40X/ WD3.7mm).
4. Stage Speedy Movement by Hand to Get Observation Point Immediately.
5. Comfortable and Enjoyable Operation with Low and Pre Position Control Knob.
6. Suitable for different Specimen Observation with Polarization Set.
7. Easy, Safe and Reliable Lamp Replacement Device
8. Available for Measuring with digital Camera and software |
| |
Application area
|
| |
| It is specially used in IT Industry for Large Area Integrate Circuit, Wafer Observation and other industrial Inspection. |
| |
| Specification |
| |
| Viewing Head |
Trinocular Head |
● |
| Eyepiece |
Extra Wide Field Eyepiece EW10X/ 22 |
● |
| Objective |
InfinitivePlan Achromatic Objectives |
4×/ 0.1WD25.4mm |
● |
| 10×/ 0.25WD11mm |
● |
| 20×/ 0.4 WD6mm |
● |
| 40×/ 0.6WD3.7mm |
● |
| Nosepiece |
Quadruple Nosepiece |
● |
| Stage |
Stage 300×268mm/ 250×250mm |
● |
| Focusing |
CoaxialCoarse & Fine Adjustment, Range24mm |
● |
| Illumination |
6V/ 20W Halogen Lamp, Brightness Adjustable |
● |
| Filter |
Blue, Green, Yellow and Ground Glass |
● |
|
| |
| Note:● Standard Outfit, ○ Optional |
|
|
| |
|
